K Sub 1502 Bass Extension

High performance bass reflex subwoofer. Twin long excursion 15" Neodym chassis provide accurate and highly efficient bass reproduction over a wide frequency range, powered by the integrated 2400 W amplifier. The on-board DSP controller offers three filter presets, a switchable cardiod mode, and a range of loudspeaker presets. A transport front cover with wheels is optionally available. The K Sub 1502 can be used in a horizontal or a vertical orientation as required.

The K Sub 1502 is also available in the selfpowered dp-version.

Specifications
  K Sub 1502
 K Sub 1502 dp
Speaker Components 2 x 15“ Nd (4“ VC) 2 x 15“ Nd (4“ VC)
Description Passive Bass Extension Digitally Powered Bass Extension
Power AES / Peak 2000 W/ 6000 W - - -
Amp Power
- - - 2400 W AES
Impedance nominal 4 Ω - - -
Rated Current - - - 3,2 A @ 230 V
SPL 1 W / Peak @ 1 m
104 dB / 142 dB - - -
SPL Peak @ 1 m - - - 142 dB
Max. Input Signal - - - 25 dBu
DSP - - - DPLMx FPGA Processing 32 bit floating point
AD / DA - - - 24 bit / 96 kHz
Latency - - - 0,8 ms (analog in to analog out)
Usable Range - 6 dB
37 Hz - 220 Hz 37 Hz - 100 / 120 / 140 Hz
Tuning Frequency excursion minimum 45 Hz 45 Hz
Connectors 2 x Speakon NL4MP in/out
Coding: 1+/- loop thru, 2+/- Sub
XLR in/thru,
Ethercon,
Powercon in/thru
Handles 6 x 6 x
Rigging / Fittings M20 on top and side
Wheelboard fittings
M20 on top and side
Wheelboard fittings
Weight 48,0 kg
(+ 8,5 kg wheelboard)
50,0 kg
(+ 8,5 kg wheelboard)
Size height x width x depth 51,2 x 94,2 x 56,0 cm 51,2 x 94,2 x 56,0 cm
Order No. 01059 01059/dp
Accessories
x
Cover

for K Sub 1502, with wheelboard

Order No. 01251
x
Wheel Board

for K Sub 1502,
stackable, 8,5 kg

Order No. 01263
x
Speaker Pole

M20, with wind up

Order No. 03023
x
Speaker Pole

M20, adjustable

Order No. 03022
x
Feet

Foot, 38 x 10 mm, Rubber

Order No. 07611

 

Foot, 38 x 10 mm, Nylon

Order No. 07609